Industrial door replacement in Burnley

The short version

Each door replacement in Burnley starts with a free survey and a written fixed price that lists the new door, strip-out, disposal and any opening repairs as separate lines.

Town: Burnley
Postcode district: BB11
Area: Lancashire
Survey: Free for new installations

Options for industrial door replacement in Burnley

Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
Opening repairs. Damaged jambs and heads repaired or new framing fitted.
Disposal. We take the old door away so there is nothing left on site to deal with.
Right door type. Like-for-like or an upgrade to suit how the opening is used now.
Free survey. Existing door, opening and space assessed free of charge.

What this work can involve

Removing a rotted timber frame and fitting new steel jambs before installing a replacement roller shutter.
Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.

Who is responsible for door safety at a site in Burnley?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for industrial door replacement in Burnley

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Burnley

Can we change door type when replacing at our Burnley unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Should we repair or replace our door in Burnley?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

How long will our opening in Burnley be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Industrial door replacement near Burnley

Our teams cover Burnley (BB11) and nearby Nelson, Colne, Accrington, along with the rest of Lancashire.

Other services in Burnley

More about Industrial door replacement · industrial doors in Burnley. Last updated 19 October 2026.