Industrial door replacement in Port Talbot

At a glance

Each door replacement in Port Talbot starts with a free survey and a written fixed price that lists the new door, strip-out, disposal and any opening repairs as separate lines.

Town: Port Talbot
Postcode district: SA13
Area: West Glamorgan
Survey: Free for new installations

Options that matter on site

Ongoing servicing. We can service the new door from the start so its history begins on day one.
Commissioning. Safety devices tested, forces measured and instructions handed over.
Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
Disposal. Old doors taken away for recycling or disposal.
Safe strip-out. Springs unwound and the old door dismantled safely.

Jobs we can carry out

Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Phasing the replacement of several loading doors so only one bay is out of use at a time.

Who is responsible for door safety at a site in Port Talbot?

In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Should we repair or replace our door in Port Talbot?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

Is the survey free for door replacement in Port Talbot?

Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.

How much does industrial door replacement cost in Port Talbot?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Port Talbot.

Industrial door replacement near Port Talbot

Our teams cover Port Talbot (SA13) and nearby Neath, Maesteg, Swansea, along with the rest of West Glamorgan.

Other services in Port Talbot

More about Industrial door replacement · industrial doors in Port Talbot. Last updated 19 October 2026.