Industrial roller shutters in Long Eaton

In short

Replacing a tired shutter in Long Eaton, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: Long Eaton
Postcode district: NG10
Area: Derbyshire
Survey: Free for new installations

What we fit in Long Eaton

Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.

What this work can involve

Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.

Powered door rules that apply in Long Eaton

Long Eaton is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Do you remove old shutters at sites in Long Eaton?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Do you repair roller shutters across Derbyshire?

Yes. We repair most makes of roller shutter across Derbyshire, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

How much is an industrial roller shutter in Long Eaton?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Long Eaton, we confirm a fixed price for your opening in writing.

Industrial roller shutters near Long Eaton

Working in Long Eaton? We also take on jobs in Ilkeston, Nottingham, West Bridgford and across Derbyshire.

Other services in Long Eaton

More about Industrial roller shutters · industrial doors in Long Eaton. Last updated 19 October 2026.