Sectional overhead doors in Long Eaton

Quick answer

We can install sectional overhead doors in Long Eaton and across Derbyshire, on new industrial units and as replacements for tired roller shutters. Every job starts with a free survey and ends with a commissioned, tested door.

Town: Long Eaton
Postcode district: NG10
Area: Derbyshire
Survey: Free for new installations

Options for sectional overhead doors in Long Eaton

Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.
Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.
Paperwork. Declaration of Performance, user instructions and commissioning records handed over on completion.
Vision panels. Add a row of vision panels or full-vision aluminium sections for daylight and a clear view of vehicles outside.
Safety devices. Every powered door is fitted with the safety functions its risk assessment needs and force-tested before handover.

Examples of work we can quote for

Fitting a bank of insulated sectional doors to a new distribution unit, with high-lift tracks to clear sprinkler mains and lighting.
Supplying sectional doors in a RAL colour matched to the existing cladding as part of a unit refurbishment between tenants.
Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.

Who is responsible for door safety at a site in Long Eaton?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

For busy sites in Derbyshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Prices for sectional overhead doors in Long Eaton

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Which safety devices does a powered sectional door in Long Eaton need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Can you replace a roller shutter with a sectional door at our Long Eaton unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Do you service sectional doors in Derbyshire?

Yes. We service and repair most makes of sectional door across Derbyshire, including spring and cable replacement, panel repairs, motor changes and safety checks, and can set up a planned maintenance schedule.

Sectional overhead doors near Long Eaton

Our teams cover Long Eaton (NG10) and nearby Ilkeston, Nottingham, West Bridgford, along with the rest of Derbyshire.

Other services in Long Eaton

More about Sectional overhead doors · industrial doors in Long Eaton. Last updated 19 October 2026.