Industrial roller shutters in Leominster

The short version

We can fit new steel roller shutters and replace old, damaged ones in Leominster and across Herefordshire, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Leominster
Postcode district: HR6
Area: Herefordshire
Survey: Free for new installations

What to specify

Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Manual override. Powered shutters keep a chain or handle override so they open without power.

What this work can involve

Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Who is responsible for door safety at a site in Leominster?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for industrial roller shutters in Leominster

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial roller shutters in Leominster: your questions

Does an electric roller shutter at our Leominster site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

How quickly can a roller shutter be fitted in Leominster?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Do you remove old shutters at sites in Leominster?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Industrial roller shutters near Leominster

Working in Leominster? We also take on jobs in Hereford, Ledbury, Malvern and across Herefordshire.

Other services in Leominster

More about Industrial roller shutters · industrial doors in Leominster. Last updated 19 October 2026.