Industrial roller shutters in Potters Bar

At a glance

Industrial roller shutters for warehouses, yards, workshops and stores in Potters Bar. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Potters Bar
Postcode district: EN6
Area: Hertfordshire
Survey: Free for new installations

Options for industrial roller shutters in Potters Bar

Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Manual override. Powered shutters keep a chain or handle override so they open without power.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.

Jobs we can carry out

Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.

Safety law for industrial doors in England

Industrial doors in Potters Bar are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Budgeting for industrial roller shutters in Potters Bar

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

How quickly can a roller shutter be fitted in Potters Bar?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Do you remove old shutters at sites in Potters Bar?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Can you convert our manual shutter in Potters Bar to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Potters Bar

Working in Potters Bar? We also take on jobs in Barnet, Enfield, Borehamwood and across Hertfordshire.

Other services in Potters Bar

More about Industrial roller shutters · industrial doors in Potters Bar. Last updated 19 October 2026.