Industrial roller shutters in Dartford

Quick answer

Industrial roller shutters for warehouses, yards, workshops and stores in Dartford. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Dartford
Postcode district: DA1
Area: Kent
Survey: Free for new installations

Options that matter on site

Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.

Typical scopes of work

Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Powered door rules that apply in Dartford

Dartford is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Do you repair roller shutters across Kent?

Yes. We repair most makes of roller shutter across Kent, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

How much is an industrial roller shutter in Dartford?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Dartford, we confirm a fixed price for your opening in writing.

Do you remove old shutters at sites in Dartford?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Industrial roller shutters near Dartford

Besides Dartford, we can survey and quote for sites in Erith, Bexley, Bexleyheath and the rest of Kent.

Other services in Dartford

More about Industrial roller shutters · industrial doors in Dartford. Last updated 19 October 2026.