Door automation and controls in Dartford

In short

Door automation for warehouses, workshops and loading bays in Dartford. We convert manual doors to electric, fit motors and control panels, and add loops, radar, remotes and interlocks to suit how each door is used.

Town: Dartford
Postcode district: DA1
Area: Kent
Survey: Free for new installations

Options for door automation and controls in Dartford

Safety devices. Every automated door gets the detection its risk assessment needs, tested before use.
Activation options. Buttons, key switches, remotes, pull cords, loops, radar and access control.
Manual override. A manual means of opening is always kept, so the door is never stuck shut without power.
Traffic lights. Signals show drivers when the door is fully open and warn when it moves.
Inverter drives. Soft start and stop with faster opening for high-cycle doors.

Jobs we can carry out

Adding radar with cross-traffic suppression to a door on a busy aisle so passing trucks do not open it.
Converting hand-chained sectional doors to electric operation with push-button controls, safety edges and photocells.
Replacing an obsolete control panel with a modern unit, then re-testing the safety devices and closing forces.

Powered door rules that apply in Dartford

Dartford is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Sites in and around Dartford vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Budgeting for door automation and controls in Dartford

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Which activation would suit our Dartford site?

It depends on who uses the door. Buttons suit staff, remotes suit drivers, pull cords and loops suit forklifts, and radar suits mixed traffic. We look at your traffic on survey and recommend a set-up.

Can our door in Dartford be automated?

If the door is in good mechanical order and a suitable motor is available, usually yes. We check balance, springs, cables, guides and the curtain or panels on survey, and recommend repair or replacement first if needed.

Do automated doors in Dartford need more maintenance?

Powered doors need their motors, controls and safety devices checked as well as the mechanical parts, so at least an annual service is common practice, more often for busy doors. Servicing visits are chargeable; the survey for an automation job is free.

Door automation and controls near Dartford

Working in Dartford? We also take on jobs in Erith, Bexley, Bexleyheath and across Kent.

Other services in Dartford

More about Door automation and controls · industrial doors in Dartford. Last updated 19 October 2026.