Insulated roller shutter doors in Aberdeen and Aberdeenshire

At a glance

If your unit in Aberdeen and Aberdeenshire loses heat through an old single-skin shutter, an insulated roller door is often the simplest fix. You get a free survey, a written fixed price and full commissioning on completion.

Area: Aberdeen and Aberdeenshire
Nation: Scotland
Main town: Aberdeen
Survey: Free for new installations

Options that matter on site

Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Electric drive. Tubular or external geared motors with a manual override for power cuts.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.

What this work can involve

Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.
Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.

Powered door rules that apply in Aberdeen and Aberdeenshire

Aberdeen and Aberdeenshire is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Most installations in Aberdeen and Aberdeenshire can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Budgeting for insulated roller shutter doors in Aberdeen and Aberdeenshire

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about insulated roller shutter doors

Can you replace our old roller shutter in Aberdeen and Aberdeenshire with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Will an insulated roller door cut heating bills at our Aberdeen and Aberdeenshire premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

How much does an insulated roller shutter door cost in Aberdeen and Aberdeenshire?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Aberdeen and Aberdeenshire opening free of charge and then put a fixed price in writing.

Towns in Aberdeen and Aberdeenshire we cover

We cover 5 towns in Aberdeen and Aberdeenshire for insulated roller shutter doors, including Aberdeen, Peterhead, Inverurie, Fraserburgh.

Other services in Aberdeen and Aberdeenshire

More about Insulated roller shutter doors. Last updated 19 October 2026.