Insulated roller shutter doors in Aberdeen

The short version

Insulated roller shutter doors for heated workshops, trade units and vehicle bays in Aberdeen. We survey the opening, check there is headroom for the coil and fit an electric door that keeps the warmth in and the weather out.

Town: Aberdeen
Postcode district: AB10
Area: Aberdeen and Aberdeenshire
Survey: Free for new installations

Options that matter on site

Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Electric drive. Tubular or external geared motors with a manual override for power cuts.
Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.

Jobs we can carry out

Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.
Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.

Safety law for industrial doors in Scotland

Industrial doors in Aberdeen are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Sites in and around Aberdeen vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Budgeting for insulated roller shutter doors in Aberdeen

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about insulated roller shutter doors

Will an insulated roller door cut heating bills at our Aberdeen premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

How much does an insulated roller shutter door cost in Aberdeen?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Aberdeen opening free of charge and then put a fixed price in writing.

Can you replace our old roller shutter in Aberdeen with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Insulated roller shutter doors near Aberdeen

Besides Aberdeen, we can survey and quote for sites in Stonehaven, Inverurie, Peterhead and the rest of Aberdeen and Aberdeenshire.

Other services in Aberdeen

More about Insulated roller shutter doors · industrial doors in Aberdeen. Last updated 19 October 2026.