Insulated roller shutter doors in Fraserburgh

In short

Replacing a draughty roller shutter in Fraserburgh? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Town: Fraserburgh
Postcode district: AB43
Area: Aberdeen and Aberdeenshire
Survey: Free for new installations

Options that matter on site

Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.

Typical scopes of work

Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.

Safety law for industrial doors in Scotland

Industrial doors in Fraserburgh are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Prices for insulated roller shutter doors in Fraserburgh

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

How long does insulated roller door installation take in Fraserburgh?

Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.

Do you repair insulated roller doors across Aberdeen and Aberdeenshire?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Aberdeen and Aberdeenshire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

Does a powered insulated roller door in Fraserburgh need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Insulated roller shutter doors near Fraserburgh

Working in Fraserburgh? We also take on jobs in Peterhead, Inverurie, Aberdeen and across Aberdeen and Aberdeenshire.

Other services in Fraserburgh

More about Insulated roller shutter doors · industrial doors in Fraserburgh. Last updated 19 October 2026.