Insulated roller shutter doors in Inverurie

The short version

We can fit foam-filled insulated roller doors in Inverurie and across Aberdeen and Aberdeenshire, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.

Town: Inverurie
Postcode district: AB51
Area: Aberdeen and Aberdeenshire
Survey: Free for new installations

What we fit in Inverurie

Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.
Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.

Jobs we can carry out

Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.

Who is responsible for door safety at a site in Inverurie?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Sites in and around Inverurie vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Inverurie

How long does insulated roller door installation take in Inverurie?

Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.

Do you repair insulated roller doors across Aberdeen and Aberdeenshire?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Aberdeen and Aberdeenshire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

Can you replace our old roller shutter in Inverurie with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Insulated roller shutter doors near Inverurie

Besides Inverurie, we can survey and quote for sites in Aberdeen, Stonehaven, Peterhead and the rest of Aberdeen and Aberdeenshire.

Other services in Inverurie

More about Insulated roller shutter doors · industrial doors in Inverurie. Last updated 19 October 2026.