Insulated roller shutter doors in Haywards Heath

At a glance

If your unit in Haywards Heath loses heat through an old single-skin shutter, an insulated roller door is often the simplest fix. You get a free survey, a written fixed price and full commissioning on completion.

Town: Haywards Heath
Postcode district: RH16
Area: West Sussex
Survey: Free for new installations

What we fit in Haywards Heath

Electric drive. Tubular or external geared motors with a manual override for power cuts.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.
Safety devices. Every powered door gets the safety functions its risk assessment calls for and is tested before handover.
Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.

Typical scopes of work

Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.

Who is responsible for door safety at a site in Haywards Heath?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about insulated roller shutter doors

Does a powered insulated roller door in Haywards Heath need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

How long does insulated roller door installation take in Haywards Heath?

Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.

How much does an insulated roller shutter door cost in Haywards Heath?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Haywards Heath opening free of charge and then put a fixed price in writing.

Insulated roller shutter doors near Haywards Heath

Haywards Heath is in the RH16 postcode district in West Sussex. We also cover Burgess Hill, Crawley, East Grinstead.

Other services in Haywards Heath

More about Insulated roller shutter doors · industrial doors in Haywards Heath. Last updated 19 October 2026.