At a glance
Busy doors in Bathgate (EH48) that close automatically need reliable detection. A full-height light curtain stops the door before it touches anyone, with a safety edge on the bottom rail as back-up.
- Town
- Bathgate
- Postcode district
- EH48
- Area
- Edinburgh and the Lothians
- Survey
- Free for new installations
Options that matter on site
- Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
- Safety edges. Edges on the closing rail detect contact and send the door back up.
- Force testing. We measure how hard the door closes and record the results at each test point.
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
- Photocells. Beams across the opening that stop the door closing while broken.
What this work can involve
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
- Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
Safety law for industrial doors in Scotland
Industrial doors in Bathgate are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Access, phasing and timing
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices for door safety upgrades
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about door safety upgrades
How long does a safety upgrade take in Bathgate?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Our door at our Bathgate site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Do you upgrade doors from other installers across Edinburgh and the Lothians?
Yes. We upgrade safety devices on most makes of powered door across Edinburgh and the Lothians, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
Door safety upgrades near Bathgate
Working in Bathgate? We also take on jobs in Livingston, Bo'ness, Grangemouth and across Edinburgh and the Lothians.
- Door safety upgrades in Livingston
- Door safety upgrades in Bo'ness
- Door safety upgrades in Grangemouth
- Door safety upgrades in Falkirk
- Door safety upgrades in Rosyth
- Door safety upgrades in Airdrie
Other services in Bathgate
- Industrial roller shutters
- Planned maintenance contracts
- Bollards and door protection
- Dock levellers
- Fire shutters
- Hangar and large-span doors
- Dock leveller and loading bay repairs
- Dock shelters and seals
More about Door safety upgrades · industrial doors in Bathgate. Last updated 19 October 2026.
