Door safety upgrades in Atherton

The short version

Older door control panels may not accept modern monitored safety devices. At premises in Atherton, we can replace them where needed, adding inverter control and better fault diagnostics in the same visit.

Town: Atherton
Postcode district: M46
Area: Greater Manchester
Survey: Free for new installations

What we fit in Atherton

Records. You receive a record of the devices fitted and the tests carried out.
Warning devices. Beacons, sounders and traffic lights to warn people of a moving door.
Light curtains. Full-height multi-beam detection across the whole opening.
Panel upgrades. Control panels with monitored safety inputs where older ones fall short.
Photocells. If something breaks the beam, the door will not close.

Typical scopes of work

Carrying out safety upgrades on the powered doors of a newly leased unit before a tenant moves in.
Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.

Safety law for industrial doors in England

Industrial doors in Atherton are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices

Door safety upgrades guide prices
Item	Guide price (ex VAT)
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door
Repair visit (attendance and first hour)	£145 – £195

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about door safety upgrades

Our door at our Atherton site has a bypassed safety edge. What should we do?

Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.

Will a safety upgrade at our Atherton premises include paperwork?

Yes. We record the devices fitted, the force test results and any changes to the control panel, and update the door's risk assessment, giving you written evidence that the door was checked and upgraded.

How much does a door safety upgrade cost in Atherton?

Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Atherton.

Door safety upgrades near Atherton

Working in Atherton? We also take on jobs in Tyldesley, Westhoughton, Leigh and across Greater Manchester.

Other services in Atherton

More about Door safety upgrades · industrial doors in Atherton. Last updated 19 October 2026.