The short version
Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Failsworth. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.
- Town
- Failsworth
- Postcode district
- M35
- Area
- Greater Manchester
- Survey
- Free for new installations
Options that matter on site
- Records. You receive a record of the devices fitted and the tests carried out.
- Safety edges. Pressure-sensitive or optical edges that stop and reverse the door on contact.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
- Photocells. Beams across the opening that stop the door closing while broken.
- Warning devices. Beacons, sounders and traffic lights to warn people of a moving door.
Jobs we can carry out
- Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
Who is responsible for door safety at a site in Failsworth?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Planning the work around your site
Sites in and around Failsworth vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Can you force-test our doors in Failsworth?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Do you upgrade doors from other installers across Greater Manchester?
Yes. We upgrade safety devices on most makes of powered door across Greater Manchester, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
How long does a safety upgrade take in Failsworth?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Door safety upgrades near Failsworth
Working in Failsworth? We also take on jobs in Droylsden, Chadderton, Ashton-under-Lyne and across Greater Manchester.
- Door safety upgrades in Droylsden
- Door safety upgrades in Chadderton
- Door safety upgrades in Ashton-under-Lyne
- Door safety upgrades in Oldham
- Door safety upgrades in Manchester
- Door safety upgrades in Middleton
Other services in Failsworth
- Planned maintenance contracts
- Sectional overhead doors
- Impact traffic doors
- Industrial door repairs
- Bollards and door protection
- Insulated roller shutter doors
- Fire shutter servicing and drop tests
- High-speed doors
More about Door safety upgrades · industrial doors in Failsworth. Last updated 19 October 2026.