In short
Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Canterbury. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.
- Town
- Canterbury
- Postcode district
- CT1
- Area
- Kent
- Survey
- Free for new installations
What we fit in Canterbury
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
- Records. Written results and updated risk assessment for your files.
- Light curtains. Full-height multi-beam detection across the whole opening.
- Force testing. We measure how hard the door closes and record the results at each test point.
- Fall protection. Spring-break, cable-break and anti-fall devices against suspension failure.
Jobs we can carry out
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
- Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
Powered door rules that apply in Canterbury
Canterbury is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
How the work is organised
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices for door safety upgrades
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Canterbury
How long does a safety upgrade take in Canterbury?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Do you upgrade doors from other installers across Kent?
Yes. We upgrade safety devices on most makes of powered door across Kent, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
How much does a door safety upgrade cost in Canterbury?
Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Canterbury.
Door safety upgrades near Canterbury
Canterbury is in the CT1 postcode district in Kent. We also cover Whitstable, Herne Bay, Faversham.
- Door safety upgrades in Whitstable
- Door safety upgrades in Herne Bay
- Door safety upgrades in Faversham
- Door safety upgrades in Ashford (Kent)
- Door safety upgrades in Folkestone
- Door safety upgrades in Deal
Other services in Canterbury
- Sectional overhead doors
- Impact traffic doors
- Sliding and folding industrial doors
- Steel personnel and fire exit doors
- Complete loading bays
- Fire shutters
- Insulated roller shutter doors
- High-speed doors
More about Door safety upgrades · industrial doors in Canterbury. Last updated 19 October 2026.