Quick answer
Wide opening, low eaves or an older structure in Canterbury (CT1)? A sliding or folding door can be designed around it, with the weight of the leaves carried wherever the building can safely take it.
- Town
- Canterbury
- Postcode district
- CT1
- Area
- Kent
- Survey
- Free for new installations
What we fit in Canterbury
- Wide spans. Openings of almost any width split into as many leaves as needed.
- Folding leaves. Bi-folding leaves stack neatly where side wall space is limited.
- Wicket doors. Pass doors built into a leaf so staff need not open the whole door.
- Electric operation. Motorised leaves with the safety devices needed to protect against crushing and shearing.
- Insulated options. Leaves can be filled with insulated panels and sealed along their edges to cut heat loss.
Typical scopes of work
- Supplying insulated sliding leaves with edge seals for a converted building now used as a heated workshop.
- Automating a pair of heavy bi-parting sliding doors with a drive motor, safety edges and photocells.
- Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.
Who is responsible for door safety at a site in Canterbury?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
Most installations in Canterbury can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.
Prices for sliding and folding industrial doors in Canterbury
| Item | Guide price (ex VAT) |
|---|---|
| Sliding / folding industrial doors | £5,995 – £24,995 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Do you repair sliding and folding doors in Canterbury?
Yes. We replace trolleys, wheels, tracks, guides and damaged cladding on most makes of sliding and folding door. Repair visits are chargeable, and we quote before carrying out larger repairs or recommending replacement.
How long does it take to fit sliding doors in Canterbury?
A pair of manual sliding doors on a sound structure is usually fitted in a day or two. Large folding doors, electric operation and new steelwork add time, which we set out with your quote.
Will a sliding door fit our building in Canterbury?
It needs wall space to the side for the leaves to slide past, or room for folded leaves to stack. We measure this on survey and choose between sliding, telescopic and folding layouts to suit what is there.
Sliding and folding industrial doors near Canterbury
Canterbury is in the CT1 postcode district in Kent. We also cover Whitstable, Herne Bay, Faversham.
- Sliding and folding industrial doors in Whitstable
- Sliding and folding industrial doors in Herne Bay
- Sliding and folding industrial doors in Faversham
- Sliding and folding industrial doors in Ashford (Kent)
- Sliding and folding industrial doors in Folkestone
- Sliding and folding industrial doors in Deal
Other services in Canterbury
- PVC strip curtains
- Impact traffic doors
- Industrial door installation
- Insulated roller shutter doors
- Complete loading bays
- Hangar and large-span doors
- Industrial door replacement
- Sectional overhead doors
More about Sliding and folding industrial doors · industrial doors in Canterbury. Last updated 19 October 2026.