In short
Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Oswestry. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.
- Town
- Oswestry
- Postcode district
- SY11
- Area
- Shropshire
- Survey
- Free for new installations
What to specify
- Warning devices. Beacons, sounders and traffic lights to warn people of a moving door.
- Records. You receive a record of the devices fitted and the tests carried out.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
- Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
What this work can involve
- Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.
- Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
- Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
Powered door rules that apply in Oswestry
Oswestry is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about door safety upgrades
Do you upgrade doors from other installers across Shropshire?
Yes. We upgrade safety devices on most makes of powered door across Shropshire, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
Our door at our Oswestry site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Do our powered doors in Oswestry need safety upgrades?
It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.
Door safety upgrades near Oswestry
Working in Oswestry? We also take on jobs in Shrewsbury, Chester, Wellington and across Shropshire.
- Door safety upgrades in Shrewsbury
- Door safety upgrades in Chester
- Door safety upgrades in Wellington
- Door safety upgrades in Telford
- Door safety upgrades in Ellesmere Port
- Door safety upgrades in Crewe
Other services in Oswestry
- Dock shelters and seals
- Insulated roller shutter doors
- Industrial door replacement
- Steel personnel and fire exit doors
- Industrial door motor replacement
- Industrial door repairs
- Complete loading bays
- Impact traffic doors
More about Door safety upgrades · industrial doors in Oswestry. Last updated 19 October 2026.