At a glance
Is a powered door at your Pontefract site missing safety devices, or are they damaged or bypassed? We bring older doors up to date with monitored safety edges, photocells, light curtains and fall protection.
- Town
- Pontefract
- Postcode district
- WF8
- Area
- West Yorkshire
- Survey
- Free for new installations
Options for door safety upgrades in Pontefract
- Light curtains. Full-height multi-beam detection across the whole opening.
- Safety edges. Edges on the closing rail detect contact and send the door back up.
- Photocells. If something breaks the beam, the door will not close.
- Records. Written results and updated risk assessment for your files.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
Jobs we can carry out
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
Who is responsible for door safety at a site in Pontefract?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Keeping your site running during the work
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Guide prices for door safety upgrades
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Pontefract
Our door at our Pontefract site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
How long does a safety upgrade take in Pontefract?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Do our powered doors in Pontefract need safety upgrades?
It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.
Door safety upgrades near Pontefract
Our teams cover Pontefract (WF8) and nearby Castleford, Wakefield, Ossett, along with the rest of West Yorkshire.
- Door safety upgrades in Castleford
- Door safety upgrades in Wakefield
- Door safety upgrades in Ossett
- Door safety upgrades in Selby
- Door safety upgrades in Barnsley
- Door safety upgrades in Leeds
Other services in Pontefract
- Planned maintenance contracts
- Impact traffic doors
- Dock shelters and seals
- Fire shutter servicing and drop tests
- Insulated roller shutter doors
- Industrial roller shutters
- Sliding and folding industrial doors
- Dock levellers
More about Door safety upgrades · industrial doors in Pontefract. Last updated 19 October 2026.