Sectional overhead doors in Cambridge

Quick answer

Sectional doors suit premises in Cambridge that need a well-sealed, insulated opening that stays clear of the yard. We handle the survey, specification, installation and commissioning, then service the door if you want us to.

Town: Cambridge
Postcode district: CB1
Area: Cambridgeshire
Survey: Free for new installations

What we fit in Cambridge

Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.
Track layouts. Standard, low headroom, high lift and vertical lift tracks, chosen after measuring your headroom.
Vision panels. Add a row of vision panels or full-vision aluminium sections for daylight and a clear view of vehicles outside.
Paperwork. Declaration of Performance, user instructions and commissioning records handed over on completion.

Examples of work we can quote for

Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.
Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.
Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.

Who is responsible for door safety at a site in Cambridge?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Sites in and around Cambridge vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Budgeting for sectional overhead doors in Cambridge

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sectional overhead doors in Cambridge: your questions

Can you replace a roller shutter with a sectional door at our Cambridge unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

How soon can a sectional door be fitted in Cambridge?

Sectional doors are made to measure, so the manufacturer's lead time sets the date. We confirm it with the quote, book installation around your operations and fit most single doors in a day once the opening is ready.

Which safety devices does a powered sectional door in Cambridge need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Sectional overhead doors near Cambridge

Besides Cambridge, we can survey and quote for sites in Newmarket, Ely, Huntingdon and the rest of Cambridgeshire.

Other services in Cambridge

More about Sectional overhead doors · industrial doors in Cambridge. Last updated 19 October 2026.