Insulated roller shutter doors in Cambridge

In short

Insulated roller shutter doors for heated workshops, trade units and vehicle bays in Cambridge. We survey the opening, check there is headroom for the coil and fit an electric door that keeps the warmth in and the weather out.

Town: Cambridge
Postcode district: CB1
Area: Cambridgeshire
Survey: Free for new installations

Options for insulated roller shutter doors in Cambridge

Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Colour choice. Powder-coated RAL finishes to match cladding and building trims.
Electric drive. Tubular or external geared motors with a manual override for power cuts.

Examples of work we can quote for

Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.

Who is responsible for door safety at a site in Cambridge?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Budgeting for insulated roller shutter doors in Cambridge

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about insulated roller shutter doors

Will an insulated roller door cut heating bills at our Cambridge premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Do you repair insulated roller doors across Cambridgeshire?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Cambridgeshire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

How long does insulated roller door installation take in Cambridge?

Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.

Insulated roller shutter doors near Cambridge

Cambridge is in the CB1 postcode district in Cambridgeshire. We also cover Newmarket, Ely, Huntingdon.

Other services in Cambridge

More about Insulated roller shutter doors · industrial doors in Cambridge. Last updated 19 October 2026.