Insulated roller shutter doors in Huntingdon

The short version

If your unit in Huntingdon loses heat through an old single-skin shutter, an insulated roller door is often the simplest fix. You get a free survey, a written fixed price and full commissioning on completion.

Town: Huntingdon
Postcode district: PE29
Area: Cambridgeshire
Survey: Free for new installations

Options that matter on site

Safety devices. Every powered door gets the safety functions its risk assessment calls for and is tested before handover.
Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.

What this work can involve

Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.

Who is responsible for door safety at a site in Huntingdon?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Huntingdon: your questions

Does a powered insulated roller door in Huntingdon need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Can you replace our old roller shutter in Huntingdon with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Will an insulated roller door cut heating bills at our Huntingdon premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Insulated roller shutter doors near Huntingdon

Working in Huntingdon? We also take on jobs in St Neots, Cambridge, Peterborough and across Cambridgeshire.

Other services in Huntingdon

More about Insulated roller shutter doors · industrial doors in Huntingdon. Last updated 19 October 2026.