Sectional overhead doors in Brentwood

In short

Sectional overhead doors for warehouses, workshops and loading bays in Brentwood. We survey the opening, specify the panels, tracks and drive to suit how the door is used, then install and commission it with full handover paperwork.

Town: Brentwood
Postcode district: CM14
Area: Essex
Survey: Free for new installations

Options that matter on site

Finishes. Choose a colour to match your building and a stucco or ribbed finish that hides minor knocks.
Paperwork. Declaration of Performance, user instructions and commissioning records handed over on completion.
Electric drives. Shaft-mounted motors with push-button, remote, loop or radar control, and inverter drives for high-cycle bays.
Track layouts. We pick the track after measuring headroom and obstructions, so the door clears lights, sprinklers and crane rails.
Vision panels. Add a row of vision panels or full-vision aluminium sections for daylight and a clear view of vehicles outside.

Examples of work we can quote for

Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.
Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.
Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.

Safety law for industrial doors in England

Industrial doors in Brentwood are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for sectional overhead doors in Brentwood

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Brentwood

Will a sectional door reduce heating costs at our Brentwood premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Do you service sectional doors in Essex?

Yes. We service and repair most makes of sectional door across Essex, including spring and cable replacement, panel repairs, motor changes and safety checks, and can set up a planned maintenance schedule.

Which safety devices does a powered sectional door in Brentwood need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Sectional overhead doors near Brentwood

Working in Brentwood? We also take on jobs in Billericay, Hornchurch, Romford and across Essex.

Other services in Brentwood

More about Sectional overhead doors · industrial doors in Brentwood. Last updated 19 October 2026.