Sectional overhead doors in Yateley

In short

Sectional overhead doors for warehouses, workshops and loading bays in Yateley. We survey the opening, specify the panels, tracks and drive to suit how the door is used, then install and commission it with full handover paperwork.

Town: Yateley
Postcode district: GU46
Area: Hampshire
Survey: Free for new installations

What we fit in Yateley

Paperwork. You get the manufacturer's Declaration of Performance plus commissioning and test records for your files.
Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.
Vision panels. Glazed rows or full-vision sections bring daylight in and let drivers see the yard.
Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.

What this work can involve

Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.
Fitting a bank of insulated sectional doors to a new distribution unit, with high-lift tracks to clear sprinkler mains and lighting.
Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.

Powered door rules that apply in Yateley

Yateley is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for sectional overhead doors

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sectional overhead doors in Yateley: your questions

Do you service sectional doors in Hampshire?

Yes. We service and repair most makes of sectional door across Hampshire, including spring and cable replacement, panel repairs, motor changes and safety checks, and can set up a planned maintenance schedule.

Which safety devices does a powered sectional door in Yateley need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Can you replace a roller shutter with a sectional door at our Yateley unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Sectional overhead doors near Yateley

Our teams cover Yateley (GU46) and nearby Sandhurst, Camberley, Fleet, along with the rest of Hampshire.

Other services in Yateley

More about Sectional overhead doors · industrial doors in Yateley. Last updated 19 October 2026.