The short version
Sliding and folding industrial doors for farms, workshops, vehicle sheds and wide-span buildings in Ramsgate. We survey the opening and the structure, then recommend a top-hung or bottom-rolling layout that suits it.
- Town
- Ramsgate
- Postcode district
- CT11
- Area
- Kent
- Survey
- Free for new installations
What we fit in Ramsgate
- Electric operation. Motor drives with safety edges, photocells and guarding where needed.
- No headroom needed. With side-opening leaves, cranes, lights and services overhead stay clear.
- Robust build. Steel-framed leaves with steel, panel or timber cladding.
- Folding leaves. Where there is little wall either side, folding leaves concertina into a compact stack.
- Wicket doors. Pass doors built into a leaf so staff need not open the whole door.
Typical scopes of work
- Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.
- Fitting bi-folding doors to a maintenance workshop where overhead gantry cranes rule out a roller shutter or sectional door.
- Installing telescopic sliding doors where the wall space to one side is limited by an adjoining structure.
Powered door rules that apply in Ramsgate
Ramsgate is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Planning the work around your site
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Sliding / folding industrial doors | £5,995 – £24,995 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Sliding and folding industrial doors in Ramsgate: your questions
Which is better for our Ramsgate site, top-hung or bottom-rolling?
Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.
How long does it take to fit sliding doors in Ramsgate?
A pair of manual sliding doors on a sound structure is usually fitted in a day or two. Large folding doors, electric operation and new steelwork add time, which we set out with your quote.
Will a sliding door fit our building in Ramsgate?
It needs wall space to the side for the leaves to slide past, or room for folded leaves to stack. We measure this on survey and choose between sliding, telescopic and folding layouts to suit what is there.
Sliding and folding industrial doors near Ramsgate
Our teams cover Ramsgate (CT11) and nearby Broadstairs, Margate, Deal, along with the rest of Kent.
- Sliding and folding industrial doors in Broadstairs
- Sliding and folding industrial doors in Margate
- Sliding and folding industrial doors in Deal
- Sliding and folding industrial doors in Herne Bay
- Sliding and folding industrial doors in Canterbury
- Sliding and folding industrial doors in Dover
Other services in Ramsgate
- Insulated roller shutter doors
- Cold store and freezer doors
- Bollards and door protection
- Hangar and large-span doors
- Complete loading bays
- PVC strip curtains
- Industrial door motor replacement
- Door safety upgrades
More about Sliding and folding industrial doors · industrial doors in Ramsgate. Last updated 19 October 2026.