Sliding and folding industrial doors in King's Lynn

The short version

We can supply and fit steel sliding and bi-folding doors in King's Lynn and across Norfolk, manual or electric, with insulated or single-skin leaves and wicket doors wherever staff need everyday access.

Town: King's Lynn
Postcode district: PE30
Area: Norfolk
Survey: Free for new installations

What we fit in King's Lynn

Robust build. Steel frames carry cladding to suit the building, from profiled steel to timber boarding.
Wicket doors. Pass doors built into a leaf so staff need not open the whole door.
Wide spans. Very wide openings are handled by adding leaves, so width is rarely a limit.
Top-hung or bottom-rolling. We hang the door from above or run it on a floor rail depending on what the building can support.
Electric operation. Motor drives with safety edges, photocells and guarding where needed.

Examples of work we can quote for

Fitting bi-folding doors to a maintenance workshop where overhead gantry cranes rule out a roller shutter or sectional door.
Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.
Replacing a damaged floor rail and guide wheels on a bottom-rolling door struck by a vehicle.

Who is responsible for door safety at a site in King's Lynn?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Most installations in King's Lynn can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Guide prices for sliding and folding industrial doors

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in King's Lynn

Do you fit sliding doors on farm buildings around Norfolk?

Yes. We supply and fit steel sliding doors on agricultural buildings across Norfolk, including timber-clad leaves, bottom-rolling gear for lightweight portal frames and wicket doors so staff and livestock handlers can get in without opening the main leaves.

How much do sliding or folding industrial doors cost in King's Lynn?

Our guide price is £5,995 to £24,995 ex VAT, supplied and fitted, depending on size, number of leaves, infill and whether the doors are manual or electric. After a free survey in King's Lynn we confirm the fixed price in writing.

Will a sliding door fit our building in King's Lynn?

It needs wall space to the side for the leaves to slide past, or room for folded leaves to stack. We measure this on survey and choose between sliding, telescopic and folding layouts to suit what is there.

Sliding and folding industrial doors near King's Lynn

Working in King's Lynn? We also take on jobs in Wisbech, March, Spalding and across Norfolk.

Other services in King's Lynn

More about Sliding and folding industrial doors · industrial doors in King's Lynn. Last updated 19 October 2026.