Sliding and folding industrial doors in Cannock

Quick answer

Sliding and folding industrial doors for farms, workshops, vehicle sheds and wide-span buildings in Cannock. We survey the opening and the structure, then recommend a top-hung or bottom-rolling layout that suits it.

Town: Cannock
Postcode district: WS11
Area: Staffordshire
Survey: Free for new installations

Options that matter on site

Robust build. Steel frames carry cladding to suit the building, from profiled steel to timber boarding.
Electric operation. Motor drives with safety edges, photocells and guarding where needed.
Top-hung or bottom-rolling. Weight carried overhead or on a floor rail, chosen to suit the structure.
Folding leaves. Where there is little wall either side, folding leaves concertina into a compact stack.
Wide spans. Very wide openings are handled by adding leaves, so width is rarely a limit.

What this work can involve

Renewing seized trolleys and a distorted overhead track on large sliding doors to a vehicle shed.
Supplying insulated sliding leaves with edge seals for a converted building now used as a heated workshop.
Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.

Who is responsible for door safety at a site in Cannock?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for sliding and folding industrial doors

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Cannock

How long does it take to fit sliding doors in Cannock?

A pair of manual sliding doors on a sound structure is usually fitted in a day or two. Large folding doors, electric operation and new steelwork add time, which we set out with your quote.

Will a sliding door fit our building in Cannock?

It needs wall space to the side for the leaves to slide past, or room for folded leaves to stack. We measure this on survey and choose between sliding, telescopic and folding layouts to suit what is there.

How much do sliding or folding industrial doors cost in Cannock?

Our guide price is £5,995 to £24,995 ex VAT, supplied and fitted, depending on size, number of leaves, infill and whether the doors are manual or electric. After a free survey in Cannock we confirm the fixed price in writing.

Sliding and folding industrial doors near Cannock

Our teams cover Cannock (WS11) and nearby Burntwood, Bloxwich, Rugeley, along with the rest of Staffordshire.

Other services in Cannock

More about Sliding and folding industrial doors · industrial doors in Cannock. Last updated 19 October 2026.