Sliding and folding industrial doors in Stratford-upon-Avon

At a glance

We can supply and fit steel sliding and bi-folding doors in Stratford-upon-Avon and across Warwickshire, manual or electric, with insulated or single-skin leaves and wicket doors wherever staff need everyday access.

Town: Stratford-upon-Avon
Postcode district: CV37
Area: Warwickshire
Survey: Free for new installations

What to specify

Wide spans. Very wide openings are handled by adding leaves, so width is rarely a limit.
No headroom needed. Leaves move sideways, so nothing coils above or runs under the roof.
Insulated options. Leaves can be filled with insulated panels and sealed along their edges to cut heat loss.
Top-hung or bottom-rolling. Weight carried overhead or on a floor rail, chosen to suit the structure.
Wicket doors. Pass doors built into a leaf so staff need not open the whole door.

Examples of work we can quote for

Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.
Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.
Automating a pair of heavy bi-parting sliding doors with a drive motor, safety edges and photocells.

Who is responsible for door safety at a site in Stratford-upon-Avon?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Which is better for our Stratford-upon-Avon site, top-hung or bottom-rolling?

Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.

Will a sliding door fit our building in Stratford-upon-Avon?

It needs wall space to the side for the leaves to slide past, or room for folded leaves to stack. We measure this on survey and choose between sliding, telescopic and folding layouts to suit what is there.

How long does it take to fit sliding doors in Stratford-upon-Avon?

A pair of manual sliding doors on a sound structure is usually fitted in a day or two. Large folding doors, electric operation and new steelwork add time, which we set out with your quote.

Sliding and folding industrial doors near Stratford-upon-Avon

Stratford-upon-Avon is in the CV37 postcode district in Warwickshire. We also cover Warwick, Leamington Spa, Kenilworth.

Other services in Stratford-upon-Avon

More about Sliding and folding industrial doors · industrial doors in Stratford-upon-Avon. Last updated 19 October 2026.