Sliding and folding industrial doors in Warwick

At a glance

Not enough headroom for a shutter at your Warwick building? Sliding and folding doors open sideways instead of upwards, leaving the roof space clear for cranes, lighting, sprinklers and other services.

Town: Warwick
Postcode district: CV34
Area: Warwickshire
Survey: Free for new installations

Options for sliding and folding industrial doors in Warwick

Robust build. Steel frames carry cladding to suit the building, from profiled steel to timber boarding.
Wide spans. Very wide openings are handled by adding leaves, so width is rarely a limit.
Top-hung or bottom-rolling. We hang the door from above or run it on a floor rail depending on what the building can support.
No headroom needed. With side-opening leaves, cranes, lights and services overhead stay clear.
Folding leaves. Bi-folding leaves stack neatly where side wall space is limited.

Typical scopes of work

Renewing seized trolleys and a distorted overhead track on large sliding doors to a vehicle shed.
Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.
Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.

Who is responsible for door safety at a site in Warwick?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Budgeting for sliding and folding industrial doors in Warwick

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sliding and folding industrial doors in Warwick: your questions

How much do sliding or folding industrial doors cost in Warwick?

Our guide price is £5,995 to £24,995 ex VAT, supplied and fitted, depending on size, number of leaves, infill and whether the doors are manual or electric. After a free survey in Warwick we confirm the fixed price in writing.

How long does it take to fit sliding doors in Warwick?

A pair of manual sliding doors on a sound structure is usually fitted in a day or two. Large folding doors, electric operation and new steelwork add time, which we set out with your quote.

Which is better for our Warwick site, top-hung or bottom-rolling?

Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.

Sliding and folding industrial doors near Warwick

Warwick is in the CV34 postcode district in Warwickshire. We also cover Leamington Spa, Kenilworth, Stratford-upon-Avon.

Other services in Warwick

More about Sliding and folding industrial doors · industrial doors in Warwick. Last updated 19 October 2026.