Steel personnel and fire exit doors in Spalding

The short version

Replacing a worn timber or tired steel door at a site in Spalding (PE11)? Our galvanised steel doorsets resist knocks, weather and forced entry, and are finished in a powder-coated colour of your choice.

Town: Spalding
Postcode district: PE11
Area: Lincolnshire
Survey: Free for new installations

What we fit in Spalding

Panic hardware. Push bars to BS EN 1125 where the public or unfamiliar people may use the exit.
Security options. Hinge bolts, multi-point locks and LPS 1175 rated doorsets.
Emergency devices. Staff-only exits used by people who know the door can take BS EN 179 lever or pad hardware.
Fire-rated doorsets. Where a door must hold back fire, we supply tested fire-rated doorsets and fit them exactly as specified.
Complete doorsets. Frame, leaf, hinges and hardware supplied as one set.

Examples of work we can quote for

Fitting a louvred double steel door to a plant room or electrical switch room to keep it ventilated and secure.
Changing worn panic bars on fire exits and adjusting the overhead closers so each door latches properly.
Installing a steel staff entrance door with an overhead closer and keypad access beside a loading bay.

Door rules for workplaces in England

Doors in Spalding workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Budgeting for steel personnel and fire exit doors in Spalding

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about steel personnel and fire exit doors

Do you repair fire exit doors across Lincolnshire?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Lincolnshire. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Which fire exit hardware do we need at our Spalding site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Can you fit fire-rated steel doors in Spalding?

Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.

Steel personnel and fire exit doors near Spalding

Besides Spalding, we can survey and quote for sites in Boston, Peterborough, Wisbech and the rest of Lincolnshire.

Other services in Spalding

More about Steel personnel and fire exit doors · industrial doors in Spalding. Last updated 19 October 2026.