Steel personnel and fire exit doors in Malvern

In short

We can supply and install steel doorsets in Malvern and across Worcestershire, from simple staff entrances to fire-rated and security-rated doors, with the frame, leaf and hardware supplied as one tested set.

Town: Malvern
Postcode district: WR14
Area: Worcestershire
Survey: Free for new installations

What we fit in Malvern

Emergency devices. Staff-only exits used by people who know the door can take BS EN 179 lever or pad hardware.
Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.
Security options. From hinge bolts to certified security doorsets, the door can be specified to resist attack.
Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.
Galvanised steel. Double-skin galvanised steel leaves with powder-coated finishes.

Jobs we can carry out

Replacing a rotted timber fire exit door with a galvanised steel doorset and a BS EN 1125 panic bar.
Changing worn panic bars on fire exits and adjusting the overhead closers so each door latches properly.
Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.

Door rules for workplaces in England

Doors in Malvern workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

How the work is organised

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for steel personnel and fire exit doors in Malvern

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about steel personnel and fire exit doors

Do you repair fire exit doors across Worcestershire?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Worcestershire. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Can a steel door at our Malvern unit be security rated?

Yes. Where an insurer asks for a formal rating, we supply steel doorsets certified to LPS 1175 and install them to the certified specification. Let us know the rating required so we can quote the right product.

How long does it take to replace a steel door in Malvern?

Most single steel doorsets are fitted in a day, including removal of the old door, fixing the new frame and making good. Made-to-measure doorsets have a manufacturing lead time, which we confirm with the quote.

Steel personnel and fire exit doors near Malvern

Our teams cover Malvern (WR14) and nearby Ledbury, Worcester, Tewkesbury, along with the rest of Worcestershire.

Other services in Malvern

More about Steel personnel and fire exit doors · industrial doors in Malvern. Last updated 19 October 2026.