Steel personnel and fire exit doors in Worcester

In short

Replacing a worn timber or tired steel door at a site in Worcester (WR1)? Our galvanised steel doorsets resist knocks, weather and forced entry, and are finished in a powder-coated colour of your choice.

Town: Worcester
Postcode district: WR1
Area: Worcestershire
Survey: Free for new installations

What we fit in Worcester

Emergency devices. Lever or push-pad devices to BS EN 179 for exits used by trained staff.
Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.
Complete doorsets. Frame, leaf, hinges and hardware supplied as one set.
Louvres and vision. Louvred leaves for plant rooms and vision panels where visibility helps.
Outside access. Key or code access from outside while the exit stays free from inside.

Typical scopes of work

Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.
Installing a steel staff entrance door with an overhead closer and keypad access beside a loading bay.

Door rules for workplaces in England

Doors in Worcester workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

How the work is organised

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices for steel personnel and fire exit doors

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about steel personnel and fire exit doors

How long does it take to replace a steel door in Worcester?

Most single steel doorsets are fitted in a day, including removal of the old door, fixing the new frame and making good. Made-to-measure doorsets have a manufacturing lead time, which we confirm with the quote.

Which fire exit hardware do we need at our Worcester site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Can you fit fire-rated steel doors in Worcester?

Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.

Steel personnel and fire exit doors near Worcester

Besides Worcester, we can survey and quote for sites in Droitwich, Malvern, Stourport-on-Severn and the rest of Worcestershire.

Other services in Worcester

More about Steel personnel and fire exit doors · industrial doors in Worcester. Last updated 19 October 2026.