Door automation and controls in Consett

In short

From a simple push-button station to airlock interlocks and traffic lights, we design and fit door controls in Consett that make each door safer and quicker to use day to day.

Town: Consett
Postcode district: DH8
Area: County Durham
Survey: Free for new installations

What we fit in Consett

Manual-to-electric. Conversions for sectional, roller and sliding doors in good order.
Traffic lights. Red and green lights and warning beacons for drivers.
Safety devices. Every automated door gets the detection its risk assessment needs, tested before use.
Inverter drives. Soft start and stop with faster opening for high-cycle doors.
Interlocks. Doors linked to each other, to levellers or to the alarm so they work in the right sequence.

What this work can involve

Replacing an obsolete control panel with a modern unit, then re-testing the safety devices and closing forces.
Converting hand-chained sectional doors to electric operation with push-button controls, safety edges and photocells.
Fitting induction loops and an inverter control panel so forklifts can open a busy internal door without stopping.

Who is responsible for door safety at a site in Consett?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Budgeting for door automation and controls in Consett

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Door automation and controls in Consett: your questions

Do you take responsibility for the conformity paperwork in Consett?

Yes. When we convert a door to power, we carry out the risk assessment, test the door and issue the Declaration of Conformity and user instructions, as the person who has made it a machine.

Can our door in Consett be automated?

If the door is in good mechanical order and a suitable motor is available, usually yes. We check balance, springs, cables, guides and the curtain or panels on survey, and recommend repair or replacement first if needed.

How much does it cost to make a door electric in Consett?

Our guide price for a manual-to-electric conversion is £1,195 to £3,195 ex VAT, including motor, control panel, basic controls and commissioning. Extra controls and safety devices are priced separately, and your fixed price in Consett follows a free survey.

Door automation and controls near Consett

Working in Consett? We also take on jobs in Stanley, Chester-le-Street, Durham and across County Durham.

Other services in Consett

More about Door automation and controls · industrial doors in Consett. Last updated 19 October 2026.