Door automation and controls in Burton upon Trent

Quick answer

Busy door at your Burton upon Trent (DE14) site? Inverter control, induction loops or radar can open it as traffic arrives and close it straight after, with photocells and safety edges watching the opening.

Town: Burton upon Trent
Postcode district: DE14
Area: Staffordshire
Survey: Free for new installations

Options for door automation and controls in Burton upon Trent

Safety devices. Every automated door gets the detection its risk assessment needs, tested before use.
Interlocks. Doors linked to each other, to levellers or to the alarm so they work in the right sequence.
Inverter drives. Soft start and stop with faster opening for high-cycle doors.
Manual-to-electric. Hand-operated doors converted to power, with the paperwork a powered door needs.
Manual override. Chain or crank override so doors open during power cuts.

Examples of work we can quote for

Replacing an obsolete control panel with a modern unit, then re-testing the safety devices and closing forces.
Fitting a centre-mounted motor to a roller shutter where a side wall leaves no room at the barrel end.
Converting hand-chained sectional doors to electric operation with push-button controls, safety edges and photocells.

Powered door rules that apply in Burton upon Trent

Burton upon Trent is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

For busy sites in Staffordshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Prices for door automation and controls in Burton upon Trent

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about door automation and controls

Can our door in Burton upon Trent be automated?

If the door is in good mechanical order and a suitable motor is available, usually yes. We check balance, springs, cables, guides and the curtain or panels on survey, and recommend repair or replacement first if needed.

Do automated doors in Burton upon Trent need more maintenance?

Powered doors need their motors, controls and safety devices checked as well as the mechanical parts, so at least an annual service is common practice, more often for busy doors. Servicing visits are chargeable; the survey for an automation job is free.

Can you add interlocks or traffic lights to doors around Staffordshire?

Yes. We fit airlock interlocks, door-to-leveller interlocks, traffic lights and warning beacons to new and existing doors across Staffordshire, subject to compatibility with the control panels already fitted, and replace panels where they cannot accept the extra inputs.

Door automation and controls near Burton upon Trent

Besides Burton upon Trent, we can survey and quote for sites in Swadlincote, Derby, Lichfield and the rest of Staffordshire.

Other services in Burton upon Trent

More about Door automation and controls · industrial doors in Burton upon Trent. Last updated 19 October 2026.