Industrial door motor replacement in Newark-on-Trent

At a glance

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Newark-on-Trent. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: Newark-on-Trent
Postcode district: NG24
Area: Nottinghamshire
Guide price: £845 – £2,395

What's included

Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Panel upgrades. New control panels with monitored safety inputs and inverter options.
Brake and override. Brakes tested and manual override checked on every change.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.

Examples of work we can quote for

Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.

Powered door rules that apply in Newark-on-Trent

Newark-on-Trent is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Newark-on-Trent: your questions

Is the motor really the problem with our door in Newark-on-Trent?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Can you replace an obsolete door motor in Newark-on-Trent?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Should we replace the whole door instead of the motor in Newark-on-Trent?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Industrial door motor replacement near Newark-on-Trent

Our teams cover Newark-on-Trent (NG24) and nearby Grantham, Arnold, Nottingham, along with the rest of Nottinghamshire.

Other services in Newark-on-Trent

More about Industrial door motor replacement · industrial doors in Newark-on-Trent. Last updated 19 October 2026.