Industrial door replacement in Holyhead

In short

Replacing a door at a unit in Holyhead (LL65) is a chance to upgrade: insulated instead of single skin, electric instead of manual, or high-speed where the opening is busy.

Town: Holyhead
Postcode district: LL65
Area: Gwynedd
Survey: Free for new installations

Options that matter on site

Opening repairs. Any damage to the opening is put right so the new door fixes securely.
Ongoing servicing. New door added to a maintenance schedule from year one.
Commissioning. Safety devices tested, forces measured and instructions handed over.
Minimal downtime. Made-to-measure door ordered first so the swap takes a day.
Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.

What this work can involve

Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Phasing the replacement of several loading doors so only one bay is out of use at a time.
Replacing a busy internal shutter with a high-speed fabric door so the opening is no longer left standing open.

Who is responsible for door safety at a site in Holyhead?

In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Sites in and around Holyhead vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Holyhead

Is the survey free for door replacement in Holyhead?

Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.

Can we change door type when replacing at our Holyhead unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Should we repair or replace our door in Holyhead?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

Industrial door replacement near Holyhead

Besides Holyhead, we can survey and quote for sites in Llangefni, Caernarfon, Bangor (Gwynedd) and the rest of Gwynedd.

Other services in Holyhead

More about Industrial door replacement · industrial doors in Holyhead. Last updated 19 October 2026.