Industrial door replacement in Blackpool

Quick answer

We can replace roller shutters, sectional doors, sliding doors and high-speed doors in Blackpool and across Lancashire, removing and disposing of the old door and fitting the new one in a single, carefully planned visit.

Town: Blackpool
Postcode district: FY1
Area: Lancashire
Survey: Free for new installations

What we fit in Blackpool

Commissioning. Each new door is tested and handed over with the documents it needs.
Disposal. Old doors taken away for recycling or disposal.
Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
Right door type. Like-for-like or an upgrade to suit how the opening is used now.
Ongoing servicing. New door added to a maintenance schedule from year one.

Examples of work we can quote for

Phasing the replacement of several loading doors so only one bay is out of use at a time.
Removing a rotted timber frame and fitting new steel jambs before installing a replacement roller shutter.
Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.

Who is responsible for door safety at a site in Blackpool?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Should we repair or replace our door in Blackpool?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

How much does industrial door replacement cost in Blackpool?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Blackpool.

How long will our opening in Blackpool be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Industrial door replacement near Blackpool

Besides Blackpool, we can survey and quote for sites in Thornton-Cleveleys, Lytham St Annes, Fleetwood and the rest of Lancashire.

Other services in Blackpool

More about Industrial door replacement · industrial doors in Blackpool. Last updated 19 October 2026.