Quick answer
Each door replacement in Lichfield starts with a free survey and a written fixed price that lists the new door, strip-out, disposal and any opening repairs as separate lines.
- Town
- Lichfield
- Postcode district
- WS13
- Area
- Staffordshire
- Survey
- Free for new installations
Options for industrial door replacement in Lichfield
- Commissioning. Each new door is tested and handed over with the documents it needs.
- Opening repairs. Damaged jambs and heads repaired or new framing fitted.
- Minimal downtime. Made-to-measure door ordered first so the swap takes a day.
- Ongoing servicing. We can service the new door from the start so its history begins on day one.
- Safe strip-out. Springs unwound and the old door dismantled safely.
Typical scopes of work
- Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.
- Phasing the replacement of several loading doors so only one bay is out of use at a time.
- Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Who is responsible for door safety at a site in Lichfield?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Keeping your site running during the work
Sites in and around Lichfield vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Budgeting for industrial door replacement in Lichfield
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Do you replace doors at multiple sites across Staffordshire?
Yes. We replace doors across Staffordshire, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.
How long will our opening in Lichfield be out of use?
The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.
Should we repair or replace our door in Lichfield?
If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.
Industrial door replacement near Lichfield
Working in Lichfield? We also take on jobs in Burntwood, Tamworth, Aldridge and across Staffordshire.
- Industrial door replacement in Burntwood
- Industrial door replacement in Tamworth
- Industrial door replacement in Aldridge
- Industrial door replacement in Rugeley
- Industrial door replacement in Sutton Coldfield
- Industrial door replacement in Cannock
Other services in Lichfield
- Industrial door installation
- PVC strip curtains
- Complete loading bays
- Door automation and controls
- Industrial roller shutters
- Steel personnel and fire exit doors
- Dock levellers
- Insulated roller shutter doors
More about Industrial door replacement · industrial doors in Lichfield. Last updated 19 October 2026.