The short version
Hangar and large-span doors for aviation, rail, marine and heavy plant buildings in Mold. We survey the opening and the structure, then design a door for its size and wind exposure before giving a fixed price.
- Town
- Mold
- Postcode district
- CH7
- Area
- Clwyd
- Survey
- Free for new installations
Options for hangar and large-span doors in Mold
- Wind resistance. Closed doors are designed to resist the wind pressure your site can see without jamming.
- Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
- Safety systems. Large doors move a lot of mass, so warning and detection devices are built in from the start.
- Load path. Bottom-rolling on floor rails or top-hung from the structure, agreed with your engineer.
- Designed per opening. Each door engineered around the opening size, structure and site wind exposure.
What this work can involve
- Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
- Coordinating floor rail installation with the groundworks contractor before new large-span door leaves arrive on site.
- Installing heavy-duty sectional doors with wind-resistant panels across the frontage of a bus or coach garage.
Powered door rules that apply in Mold
Mold is in Wales, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
Sites in and around Mold vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Budgeting for hangar and large-span doors in Mold
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about hangar and large-span doors
Do you service large doors across Clwyd?
Yes. We service and repair hangar and large-span doors across Clwyd, including running gear, drives, controls and safety devices. Service and repair visits are chargeable and quoted before work starts.
Do you work on hangar door projects with our engineer in Mold?
Yes. We coordinate loads, fixings, floor rails and steelwork with your structural engineer and main contractor so the door and the building are designed together, and we agree a programme before manufacture.
How much does a hangar door cost in Mold?
Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Mold, we confirm a fixed price in writing.
Hangar and large-span doors near Mold
Our teams cover Mold (CH7) and nearby Buckley, Connah's Quay, Flint, along with the rest of Clwyd.
- Hangar and large-span doors in Buckley
- Hangar and large-span doors in Connah's Quay
- Hangar and large-span doors in Flint
- Hangar and large-span doors in Wrexham
- Hangar and large-span doors in Rhyl
- Hangar and large-span doors in Colwyn Bay
Other services in Mold
- High-speed doors
- Cold store and freezer doors
- PVC strip curtains
- Sectional overhead doors
- Door safety upgrades
- Impact traffic doors
- Industrial door motor replacement
- Dock shelters and seals
More about Hangar and large-span doors · industrial doors in Mold. Last updated 19 October 2026.