The short version
Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Peterhead. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.
- Town
- Peterhead
- Postcode district
- AB42
- Area
- Aberdeen and Aberdeenshire
- Survey
- Free for new installations
Options that matter on site
- Records. Written results and updated risk assessment for your files.
- Safety edges. Pressure-sensitive or optical edges that stop and reverse the door on contact.
- Panel upgrades. Control panels with monitored safety inputs where older ones fall short.
- Light curtains. Full-height multi-beam detection across the whole opening.
- Force testing. We measure how hard the door closes and record the results at each test point.
Examples of work we can quote for
- Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
- Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
Who is responsible for door safety at a site in Peterhead?
In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
Most installations in Peterhead can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about door safety upgrades
Can you force-test our doors in Peterhead?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Our door at our Peterhead site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
How long does a safety upgrade take in Peterhead?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Door safety upgrades near Peterhead
Besides Peterhead, we can survey and quote for sites in Fraserburgh, Inverurie, Aberdeen and the rest of Aberdeen and Aberdeenshire.
- Door safety upgrades in Fraserburgh
- Door safety upgrades in Inverurie
- Door safety upgrades in Aberdeen
- Door safety upgrades in Stonehaven
- Door safety upgrades in Elgin
- Door safety upgrades in Montrose
Other services in Peterhead
- Fire shutter servicing and drop tests
- Cold store and freezer doors
- Door automation and controls
- Planned maintenance contracts
- Industrial door replacement
- Industrial door repairs
- High-speed doors
- PVC strip curtains
More about Door safety upgrades · industrial doors in Peterhead. Last updated 19 October 2026.