Door safety upgrades in Hitchin

Quick answer

Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Hitchin. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.

Town: Hitchin
Postcode district: SG5
Area: Hertfordshire
Survey: Free for new installations

Options that matter on site

Force testing. Closing forces measured against BS EN 12453 limits and recorded.
Safety edges. Edges on the closing rail detect contact and send the door back up.
Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
Records. Written results and updated risk assessment for your files.
Light curtains. Full-height multi-beam detection across the whole opening.

Examples of work we can quote for

Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.

Who is responsible for door safety at a site in Hitchin?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Budgeting for door safety upgrades in Hitchin

Door safety upgrades guide prices
Item	Guide price (ex VAT)
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door
Repair visit (attendance and first hour)	£145 – £195

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Door safety upgrades in Hitchin: your questions

Will a safety upgrade at our Hitchin premises include paperwork?

Yes. We record the devices fitted, the force test results and any changes to the control panel, and update the door's risk assessment, giving you written evidence that the door was checked and upgraded.

How much does a door safety upgrade cost in Hitchin?

Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Hitchin.

Our door at our Hitchin site has a bypassed safety edge. What should we do?

Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.

Door safety upgrades near Hitchin

Our teams cover Hitchin (SG5) and nearby Letchworth Garden City, Stevenage, Luton, along with the rest of Hertfordshire.

Other services in Hitchin

More about Door safety upgrades · industrial doors in Hitchin. Last updated 19 October 2026.