Steel personnel and fire exit doors in Bloxwich

In short

Need a new fire exit door at your premises in Bloxwich? We fit steel doors with panic bars to BS EN 1125 or emergency exit devices to BS EN 179, chosen according to who will actually use the exit.

Town: Bloxwich
Postcode district: WS3
Area: West Midlands
Survey: Free for new installations

Options that matter on site

Emergency devices. Lever or push-pad devices to BS EN 179 for exits used by trained staff.
Fire-rated doorsets. Where a door must hold back fire, we supply tested fire-rated doorsets and fit them exactly as specified.
Louvres and vision. Ventilation louvres for plant and switch rooms, and glazed panels where people need to see through.
Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.
Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.

What this work can involve

Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
Replacing a rotted timber fire exit door with a galvanised steel doorset and a BS EN 1125 panic bar.
Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.

Which workplace rules apply to these doors?

For premises in Bloxwich, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.

How the work is organised

For busy sites in the West Midlands the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Budgeting for steel personnel and fire exit doors in Bloxwich

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about steel personnel and fire exit doors

How much is a steel personnel door in Bloxwich?

Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Bloxwich premises in writing after a free survey.

Do you repair fire exit doors across the West Midlands?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across the West Midlands. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Can our Bloxwich fire exit be locked from outside?

Yes. It can be secure from outside, with a key or code device or no external hardware, as long as it always opens from inside using the exit hardware. Never lock or chain a fire exit while people are in the building.

Steel personnel and fire exit doors near Bloxwich

Working in Bloxwich? We also take on jobs in Walsall, Willenhall, Aldridge and across the West Midlands.

Other services in Bloxwich

More about Steel personnel and fire exit doors · industrial doors in Bloxwich. Last updated 19 October 2026.