Steel personnel and fire exit doors in Walsall

In short

Steel personnel doors and fire exit doors for warehouses, factories, plant rooms and trade units in Walsall. We survey each opening, specify the right hardware and rating, then supply and fit a complete steel doorset.

Town: Walsall
Postcode district: WS1
Area: West Midlands
Survey: Free for new installations

Options that matter on site

Galvanised steel. Double-skin galvanised steel leaves with powder-coated finishes.
Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.
Louvres and vision. Ventilation louvres for plant and switch rooms, and glazed panels where people need to see through.
Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.
Complete doorsets. Frame, leaf, hinges and hardware supplied as one set.

Jobs we can carry out

Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.
Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.
Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.

Door rules for workplaces in England

Doors in Walsall workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

Keeping your site running during the work

For busy sites in the West Midlands the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Guide prices for steel personnel and fire exit doors

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Walsall

Do you repair fire exit doors across the West Midlands?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across the West Midlands. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Which fire exit hardware do we need at our Walsall site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Can a steel door at our Walsall unit be security rated?

Yes. Where an insurer asks for a formal rating, we supply steel doorsets certified to LPS 1175 and install them to the certified specification. Let us know the rating required so we can quote the right product.

Steel personnel and fire exit doors near Walsall

Working in Walsall? We also take on jobs in Bloxwich, Wednesbury, Aldridge and across the West Midlands.

Other services in Walsall

More about Steel personnel and fire exit doors · industrial doors in Walsall. Last updated 19 October 2026.