Steel personnel and fire exit doors in Burntwood

In short

Need a new fire exit door at your premises in Burntwood? We fit steel doors with panic bars to BS EN 1125 or emergency exit devices to BS EN 179, chosen according to who will actually use the exit.

Town: Burntwood
Postcode district: WS7
Area: Staffordshire
Survey: Free for new installations

What we fit in Burntwood

Security options. Hinge bolts, multi-point locks and LPS 1175 rated doorsets.
Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.
Emergency devices. Staff-only exits used by people who know the door can take BS EN 179 lever or pad hardware.
Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.
Fire-rated doorsets. Where a door must hold back fire, we supply tested fire-rated doorsets and fit them exactly as specified.

Jobs we can carry out

Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.
Replacing a rotted timber fire exit door with a galvanised steel doorset and a BS EN 1125 panic bar.
Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.

Which workplace rules apply to these doors?

For premises in Burntwood, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.

Access, phasing and timing

Most installations in Burntwood can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Guide prices

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Burntwood

Can our Burntwood fire exit be locked from outside?

Yes. It can be secure from outside, with a key or code device or no external hardware, as long as it always opens from inside using the exit hardware. Never lock or chain a fire exit while people are in the building.

Do you repair fire exit doors across Staffordshire?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Staffordshire. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

How much is a steel personnel door in Burntwood?

Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Burntwood premises in writing after a free survey.

Steel personnel and fire exit doors near Burntwood

Working in Burntwood? We also take on jobs in Lichfield, Cannock, Aldridge and across Staffordshire.

Other services in Burntwood

More about Steel personnel and fire exit doors · industrial doors in Burntwood. Last updated 19 October 2026.