Door safety upgrades in Stockton-on-Tees

In short

Busy doors in Stockton-on-Tees (TS18) that close automatically need reliable detection. A full-height light curtain stops the door before it touches anyone, with a safety edge on the bottom rail as back-up.

Town: Stockton-on-Tees
Postcode district: TS18
Area: County Durham
Survey: Free for new installations

What we fit in Stockton-on-Tees

Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
Warning devices. Lights and sounders make sure people know when a door is about to move.
Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
Records. You receive a record of the devices fitted and the tests carried out.
Photocells. Beams across the opening that stop the door closing while broken.

Jobs we can carry out

Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.

Who is responsible for door safety at a site in Stockton-on-Tees?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Budgeting for door safety upgrades in Stockton-on-Tees

Door safety upgrades guide prices
Item	Guide price (ex VAT)
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door
Repair visit (attendance and first hour)	£145 – £195

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Stockton-on-Tees

Do you upgrade doors from other installers across County Durham?

Yes. We upgrade safety devices on most makes of powered door across County Durham, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.

How much does a door safety upgrade cost in Stockton-on-Tees?

Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Stockton-on-Tees.

How long does a safety upgrade take in Stockton-on-Tees?

Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.

Door safety upgrades near Stockton-on-Tees

Stockton-on-Tees is in the TS18 postcode district in County Durham. We also cover Billingham, Thornaby-on-Tees, Middlesbrough.

Other services in Stockton-on-Tees

More about Door safety upgrades · industrial doors in Stockton-on-Tees. Last updated 19 October 2026.