Door safety upgrades in Cannock

The short version

Every safety upgrade in Cannock starts with a free survey and force test of the door as it stands, followed by a written fixed price for the devices we recommend before any work starts.

Town: Cannock
Postcode district: WS11
Area: Staffordshire
Survey: Free for new installations

Options that matter on site

Photocells. Beams across the opening that stop the door closing while broken.
Force testing. Closing forces measured against BS EN 12453 limits and recorded.
Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
Warning devices. Beacons, sounders and traffic lights to warn people of a moving door.

Typical scopes of work

Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.

Who is responsible for door safety at a site in Cannock?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices

Door safety upgrades guide prices
Item	Guide price (ex VAT)
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door
Repair visit (attendance and first hour)	£145 – £195

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Cannock

Can you force-test our doors in Cannock?

Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.

Will a safety upgrade at our Cannock premises include paperwork?

Yes. We record the devices fitted, the force test results and any changes to the control panel, and update the door's risk assessment, giving you written evidence that the door was checked and upgraded.

Do our powered doors in Cannock need safety upgrades?

It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.

Door safety upgrades near Cannock

Working in Cannock? We also take on jobs in Burntwood, Bloxwich, Rugeley and across Staffordshire.

Other services in Cannock

More about Door safety upgrades · industrial doors in Cannock. Last updated 19 October 2026.