Sectional overhead doors in Hastings

In short

We can install sectional overhead doors in Hastings and across East Sussex, on new industrial units and as replacements for tired roller shutters. Every job starts with a free survey and ends with a commissioned, tested door.

Town: Hastings
Postcode district: TN34
Area: East Sussex
Survey: Free for new installations

Options that matter on site

Electric drives. Motorised operation with the controls you need, from a simple push-button station to induction loops and radar.
Insulated panels. Steel sandwich panels with a foam core keep heat in and noise out; thicker panels are available for temperature-controlled units.
Safety devices. Every powered door is fitted with the safety functions its risk assessment needs and force-tested before handover.
Finishes. RAL colours to match cladding, with stucco or woodgrain embossing on the outer skin.
Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.

Typical scopes of work

Fitting a bank of insulated sectional doors to a new distribution unit, with high-lift tracks to clear sprinkler mains and lighting.
Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.
Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.

Safety law for industrial doors in England

Industrial doors in Hastings are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Keeping your site running during the work

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Prices for sectional overhead doors in Hastings

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sectional overhead doors in Hastings: your questions

Do you survey sites in Hastings before quoting?

Yes. Surveys for new and replacement doors are free. We measure the opening, headroom and obstructions, check the fixings and power supply, and discuss how the door will be used before we price it.

Can you replace a roller shutter with a sectional door at our Hastings unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Will a sectional door reduce heating costs at our Hastings premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Sectional overhead doors near Hastings

Besides Hastings, we can survey and quote for sites in Bexhill-on-Sea, Hailsham, Eastbourne and the rest of East Sussex.

Other services in Hastings

More about Sectional overhead doors · industrial doors in Hastings. Last updated 19 October 2026.